Processing of smooth cut tiles with equal thickness:
These tiles can be used on a bedding of stabilized sand, however the top of the bedding must be covered with a thin layer of cement to bond the tile to the surface. Next, tap the tile with a pure rubber hammer to the proper height.  
After laying the paving must be hosed down so that no cement film remains on the tiles. This also moisturizes the stabilized sand, which is better for curing. Next, if necessary, the final corrections can be done by tapping the tiles level.. Finally, stay off the pavement for 1 day, in cases of cold weather even longer is preferable.  
Grouting: This can be done at the customers’ request:
• In case of tight joints with silver sand
• In case of large joints with-split in size 0 / 5 (this contains loam)
• with cement
• Fixed joint

Only use cement if it is certain that the customer wants it. Expe-rience shows that almost all concrete joints are destroyed after some time as a result of freezing. Natural stone is unique in its color nuance and structure. No two stones are the same. For that reason tiles from different packages should be mixed before processing so that a harmonious distribution of colours and shades of the material can be obtained. After the materials are processed, complaints on the materials won’t be taken into consideration!